公開日:2022/05/07 / 最終更新日:2022/05/07

Boat Covers Direct® Bimini Tops come standard with all of the hardware wanted to mount and enjoy your top. All Bimini fittings below are supplied as alternative elements. See our bimini tops if you are trying to cost a new top to your boat.

The nylon that we use is a USA made, heavy-responsibility, robust and durable artificial polymer. If you liked this article and you would like to get extra details about marine fitting cost kindly pay a visit to our own web-page. Available in Black.

Our stainless fittings are 316 composition, marine-grade stainless steel.

Deck Hinges

Part Number: 7405

– Excellent for customary mounting purposes

– Base measurement 3/4″ by 2″

– Panhead screw, drilled for #10 screws

– Footprint: 7/8″ wide

– Between holes on middle: 1 9/16″

Deck Hinge, 90 Degrees

Part Number: 88320

– Excellent for normal mounting functions

– Base measurement 3/4″ by 2″

– Panhead screw, drilled for boat cleat #10 screws

– Footprint: 7/8″ Wide

– Between holes on heart: 1 5/8″

Part Number: UNDH

– Easy mounting on any surface, pivots to adapt to any angle

– 2 5/8″ long x 13/16″ wide x 1 5/8″ excessive

– Footprint: 2 7/16″ lengthy x 7/8″ broad

– Between holes on middle: 1 9/16″

Universal Deck Hinge

Part Number: UNDHSS

– Easy mounting on any floor, pivots to adapt to any angle

– 2 5/8″ lengthy x 13/16″ broad x 1 5/8″ high

– Footprint: 2 5/8″ long x 7/8″ extensive

– Between heart holes: 2 1/32″

Part Number: 88320N

Combination Deck Hinge Slide/Lock – Right Side

Part Number: 7445RB

Combination Deck Hinge Slide/Lock – Left Side

Part Number: 7445LB

– Used to attach the Bimini high to the deck when utilizing a slide track

Deck Hinge Drilled for Quick-Release Pin

Part Number: 7405D

– Order with our fast release pin, Part# 88547, for straightforward removing of your Bimini top

Eye Ends

1″ Square Outside Eye End With Set Screw

Part Number: 7517

Part Number: 7406

7/8″ Outside Eye Ends

Part Number: 88313

– Fits round tubing

– Does not embrace set screw

Inside Eye End

Part Number: 7408

1″ Square Outside Eye End

Part Number: boat hardware 7410

Jaw Slides

1″ Square Jaw Slide

Part Number: 7515

– Fits square tubing

$8. Makes installation of brace kits. Jaw slides a breeze.

– Fits spherical tubing

7/8″ Hinged Jaw Slide

Part Number: HJSSS

– Makes set up of brace kits and jaw slides a breeze.

– Fits round tubing

$20.22

7/8″ Jaw Slide

Part Number: 7407

7/8″ Jaw Slides

Part Number: 88316

– Fits spherical tubing

$17.Eighty four

Other

Product

Material

Price

Quantity

Concave Rail Adaptor

Part Number: 61111

– Used for rail mounting purposes

Channel Trim End Cap – Fits Over .850 Track

Part Number: 7404B

– Used at the tip of a slide observe

Nylon

Quick Release Pin with Lanyard and Eye

Part Number: 88547

– Use with deck hinge 88320N or 7405BD for easy removing.

– 6″ cable-loop finish.

– Rod is 1/4″ diameter, 1 5/8″ lengthy, and has a 3/4″ grip.

– The opening must be .265″, which is barely larger than the pre-drilled gap so you don’t need to drive the pin by way of the hole

Stainless

Eye Strap / Pad Eye / Strap Eye

Part Number: ES

– Length 1 7/8″, Height 1/2″

– Drilled for #eight screws

– Sold Individually

Nickel Plated Brass

$8.57

Need a bimini prime alternative storage boot? We provide these as well!